*** netpbm-10.26.52.orig/Makefile.config Mon Apr 7 20:00:08 2008 --- netpbm-10.26.52/Makefile.config Mon Apr 7 16:47:35 2008 *************** *** 0 **** --- 1,563 ---- + # This is a make file inclusion, to be included in all the Netpbm make + # files. + + # This file is meant to contain variable settings that customize the + # build for a particular target system configuration. + + # The distribution contains the file Makefile.config.in. You edit + # Makefile.config.in in ways relevant to your particular environment + # to create Makefile.config. The "configure" program will do this + # for you in simple cases. + + # Some of the variables that the including make file must set for this + # file to work: + # + # SRCDIR: The directory at the top of the Netpbm source tree. Note that + # this is typically a relative directory, and it must be relative to the + # make file that includes this file. + + DEFAULT_TARGET = nonmerge + #DEFAULT_TARGET = merge + + # Fiasco has some special requirements that make it fail to compile on + # some systems, and since it isn't very important, just set this to "N" + # and skip it on those systems unless you want to debug it and fix it. + # OpenBSD: + #BUILD_FIASCO = N + BUILD_FIASCO = Y + + # The following are commands for the build process to use. These values + # do not get built into anything. + + # The C compiler (including macro preprocessor) + #CC = gcc + # Note that 'cc' is usually an alias for whatever is the main compiler + # on a system, e.g. the GNU Compiler on Linux. + CC = gcc + + # The linker. + LD = $(CC) + #LD = ld + #Tru64: + #LD = cc + #LD = gcc + + #If the linker identified above is a compiler that invokes a linker + #(as in 'cc foo.o -o foo'), set LINKERISCOMPILER. The main difference is + #that we expect a compiler to take linker options in the '-Wl,-opt1,val1' + #syntax whereas the actual linker would take '-opt1 val1'. + LINKERISCOMPILER=Y + #If $(LD) is 'ld': + #LINKERISCOMPILER=N + + #LINKER_CAN_DO_EXPLICIT_LIBRARY means the linker specified above can + #take a library as just another link object argument, as in 'ld + #pnmtojpeg.o /usr/local/lib/libjpeg.so ...' as opposed to requiring a + #-l option as in 'ld pnmtojpeg.o -L/usr/local/lib -l jpeg'. + #This variable controls how 'libopt' gets built. Note that with some + #linkers, you can specify a shared library explicitly, but then it has + #to live in that exact place at run time. That's not good enough for us. + + LINKER_CAN_DO_EXPLICIT_LIBRARY=N + #GNU: + #LINKER_CAN_DO_EXPLICIT_LIBRARY=Y + + # This is the name of the header file that declares the types + # uint32_t, etc. This name is used as #include $(INTTYPES_H) . + # Set to null if the types come automatically without including anything. + #INTTYPES_H = + # Linux libc5: + #INTTYPES_H = + # Solaris: + INTTYPES_H = + # Others: + #INTTYPES_H = + #INTTYPES_H = + # The automatically generated Netpbm version: + #INTTYPES_H = "inttypes_netpbm.h" + + # CC and LD are for building the Netpbm programs, which are not necessarily + # intended to run on the same system on which Make is running. But when we + # build a build tool such as Libopt, it is meant to run only on the same + # system on which the Make is running. The variables below define programs + # to use to compile and link build tools. + CC_FOR_BUILD = $(CC) + LD_FOR_BUILD = $(LD) + + # MAKE is set automatically by Make to what was used to invoke Make. + + INSTALL = $(SRCDIR)/buildtools/install.sh + #Solaris: + #INSTALL = /usr/ucb/install + #Tru64: + #INSTALL = installbsd + #OSF1: + #INSTALL = $(SRCDIR)/buildtools/installosf + #Red Hat Linux: + #INSTALL = install + + # STRIPFLAG is the option you pass to the above install program to make it + # strip unnecessary information out of binaries. + STRIPFLAG = -s + # If you don't want to strip the binaries, just leave it null: + #STRIPFLAG = + + SYMLINK = ln -s + # At least some Windows environments don't have any concept of symbolic + # links, but direct copies are usually a passable alternative. + #SYMLINK = cp + + #MANPAGE_FORMAT is "nroff" or "cat". It determines in what format the + #pointer man pages are installed (ready to nroff, or ready to cat). + #A pointer man pages is just a single-paragraph pages that tells you there is + #no man page for the program, to look at the HTML documentation instead. + MANPAGE_FORMAT = nroff + #MANPAGE_FORMAT = cat + + AR = ar + RANLIB = ranlib + # IRIX, SCO don't have Ranlib: + #RANLIB = true + LEX = flex + # Solaris: + # LEX = flex -e + # Or just skip parts that need Lex: + # LEX = + + # C compiler options + + # gcc: + # -ansi and -Werror should work too, but are not included + # by default because there's no point in daring the build to fail. + # -pedantic isn't a problem because it causes at worst a warning. + #CFLAGS = -O3 -fast-math -pedantic \ + # -Wall -Wno-uninitialized -Wmissing-declarations + # The merged programs have a main_XXX subroutine instead of main(), + # which would cause a warning with -Wmissing-declarations or + # -Wmissing-prototypes. + #CFLAGS_MERGE = -Wno-missing-declarations -Wno-missing-prototypes + # A user of DEC Tru64 4.0F in May 2000 needed -DLONG_32 for ppmtompeg, + # but word size-sensitive code was removed from parallel.c in September 2004. + # A user of Tru64 5.1A in July 2003 needed NOT to have -DLONG_32. In + # theory, you need this if on your system, long is 32 bits and int is not. + # But it may be completely irrelevant today. + #Tru64: + #CFLAGS = -O2 -std1 -DLONG_32 + #CFLAGS = -O2 -std1 + #AIX: + #CFLAGS= -O3 + #HP-UX: + #CFLAGS= -O3 -fPIC + #IRIX: + #CFLAGS= -n32 -O3 + #Amiga with GNU compiler: + #CFLAGS= -m68020-60 -ffast-math -mstackextend + # You can add -noixemul for Amiga and successfully compile most of the + # programs. (Of the remaining ones, if you can supply your own strtod() + # function, most of them will build with -noixemul). So try building + # with 'make --keep-going CADD=-noixemul' first, then just 'make' to build + # everything that failed for lack of the ixemul library in the first step. + # That way, the parts that don't required the ixemul library won't indicate + # a dependency on it. + #OpenBSD: + #CFLAGS = -I/usr/local/include + + # EXE is a suffix that the linker puts on any executable it generates. + # In cygwin, this is .exe and most programs deal with its existence without + # us having to know about it. Some don't though, so set this: + + EXE = + #Cygwin, DJGPP/Windows: + #EXE = .exe + + # linker options. + + # LDFLAGS is often set as an environment variable; A setting here overrides + # it. So either make sure you want to override it, or do a "LDFLAGS +=" here. + + # Eunice users may want to use -noshare so that the executables can + # run standalone: + #LDFLAGS += -noshare + #Tru64: + # Russ Allberry says on 2001.06.09 that -oldstyle_liblookup may be necessary + # to keep from finding an ancient system libjpeg.so that isn't compatible with + # NetPBM. Michael Long found that /usr/local/lib is not in the default + # search path, or not soon enough, and he was getting an old libjpeg that + # caused all the jpeg symbol references to be unresolved. He had installed + # a new libjpeg in /usr/local/lib. + #LDFLAGS += -call_shared -oldstyle_liblookup -L/usr/local/lib + #AIX: + #LDFLAGS += -L /usr/pubsw/lib + #HP-UX: + #LDFLAGS += -Wl,+b,/usr/pubsw/lib + #IRIX: + #LDFLAGS += -n32 + #FreeBSD, OpenBSD: + # (04.03.15 This may be a mistake. LDFLAGS may already be set to this as + # an environment variable. We used to override the environment variable + # here with LDFLAGS =, which would mean we had to override with the same + # value it already had. I suspect it will work fine with no LDFLAGS + # setting at all; need to confirm this on real FreeBSD and OpenBSD systems) + #LDFLAGS += -L/usr/local/lib + + # Linker options for created Netpbm shared libraries. + + # Here, $(SONAME) resolves to the soname for the shared library being created. + # The following are gcc options. This works on GNU libc systems. + #LDSHLIB = -shared -Wl,-soname,$(SONAME) + # You need -nostart instead of -shared on BeOS. Though the BeOS compiler is + # ostensibly gcc, it has the -nostart option, which is not mentioned in gcc + # documentation and doesn't exist in at least one non-BeOS installation. + # BeOS doesn't have sonames built in. + #LDSHLIB = -nostart + #LDSHLIB = -G + # Solaris, SunOS with GNU Ld, SCO: + # These systems have no soname option. + #LDSHLIB = -shared + # Solaris with Sun Ld: + #LDSHLIB = -Wl,-Bdynamic,-G,-h,$(SONAME) + #Tru64: + #LDSHLIB = -shared -expect_unresolved "*" + #IRIX: + #LDSHLIB = -shared -n32 + #AIX GNU compiler/linker: + #LDSHLIB = -shared + #AIX Visual Age C: + #LDSHLIB = -qmkshrobj + + # LDRELOC is the command to combine two .o files (relocateable object files) + # into a single .o file that can later be linked into something else. NONE + # means no such command is available. + + LDRELOC = NONE + # GNU Ld: + # Older GNU Ld misspells the option as --relocateable. Newer GNU Ld + # correctly spells it --relocatable. The abbreviation --reloc works on + # both. + #LDRELOC = ld --reloc + #LDRELOC = ld -r + + + # On older systems, you have to make shared libraries out of position + # independent code, so you need -fpic or fPIC here. (The rule is: if + # -fpic works, use it. If it bombs, go to fPIC). On newer systems, + # it isn't necessary, but can save real memory at the expense of + # execution speed. Without position independent code, the library + # loader may have to patch addresses into the executable text. On an + # older system, this would cause a program crash because the loader + # would be writing into read-only shared memory. But on newer + # systems, the system silently creates a private mapping of the page + # or segment being modified (the "copy on write" phenomenon). So it + # needs its own private real page frame. In one experiment, A second + # copy of Pbmtext used 16K less real memory when built with -fpic than + # when built without. 2001.06.02. + + CFLAGS_SHLIB = + # Solaris or SunOS with gcc, and NetBSD: + #CFLAGS_SHLIB = -fpic + #CFLAGS_SHLIB = -fPIC + # Sun compiler: + #CFLAGS_SHLIB = -Kpic + #CFLAGS_SHLIB = -KPIC + + # SHLIB_CLIB is the link option to include the C library in a shared library, + # normally "-lc". On typical systems, this serves no purpose. On some, + # though, it causes information about which C library to use to be recorded + # in the shared library and thus choose the correct library among several or + # avoid using an incompatible one. But on some systems, the link fails. + # On 2002.09.30, "John H. DuBois III" reports that on + # SCO OpenServer, he gets the following error message with -lc: + # + # -lc; relocations referenced ; from file(s) /usr/ccs/lib/libc.so(random.o); + # fatal error: relocations remain against allocatable but non-writable + # section: ; .text + + SHLIB_CLIB = -lc + # SCO: + SHLIB_CLIB = + + # On some systems you have to build into an executable the list of + # directories where its dynamically linked libraries can be found at + # run time. This is typically done with a -R or -rpath linker + # option. Even on systems that don't require it, you might prefer to do + # that rather than set up environment variables or configuration files + # to tell the system where the libraries are. A "Y" here means to put + # the directory information in the executable at link time. + + NEED_RUNTIME_PATH = N + # Solaris, SunOS, NetBSD, AIX: + #NEED_RUNTIME_PATH = Y + + # RPATHOPTNAME is the option you use on the link command to specify + # a runtime search path for a shared library. It is meaningless unless + # NEED_RUNTIME_PATH is Y. + RPATHOPTNAME = -rpath + + # The following variables tell where your various libraries on which + # Netpbm depends live. The LIBxxx variable is a full file + # specification of the link library (not necessarily the library used + # at run time). e.g. "/usr/local/lib/graphics/libpng.so". It usually + # doesn't matter if the library prefix and suffix are right -- you can + # use "lib" and ".so" or ".a" regardless of what your system actually + # uses because these just turn into "-L" and "-l" linker options + # anyway. ".a" implies a static library for some purposes, though. + # If you don't have the library in question, use a value of NONE for + # LIBxxx and the build will simply skip the programs that require that + # library. If the library is in your linker's (or the Netpbm build's) + # default search path, leave off the directory part, e.g. "libpng.so". + + # The xxxHDR_DIR variable is the directory in which the interface + # headers for the library live (e.g. /usr/include). If they are in your + # compiler's default search path, set this variable to null. + + # This is where the Netpbm shared libraries will reside when Netpbm is + # fully installed. In some configurations, the Netpbm builder builds + # this information into the Netpbm executables. This does NOT affect + # where the Netpbm installer installs the libraries. A null value + # means the libraries are in a default search path used by the runtime + # library loader. + NETPBMLIB_RUNTIME_PATH = /opt/netpbm-10.26.52/lib + #NETPBMLIB_RUNTIME_PATH = /usr/lib/netpbm + + # The TIFF library. See above. If you want to build the tiff + # converters, you must have the tiff library already installed. + + TIFFLIB = libtiff.so + TIFFHDR_DIR = /usr/include + + #TIFFLIB = libtiff.so + #TIFFHDR_DIR = /usr/include/libtiff + #NetBSD: + #TIFFLIB = $(LOCALBASE)/lib/libtiff.so + #TIFFHDR_DIR = $(LOCALBASE)/include + # OSF, Tru64: + #TIFFLIB = /usr/local1/DEC/lib/libtiff.so + #TIFFHDR_DIR = /usr/local1/DEC/include + + # Some TIFF libraries do Jpeg and/or Z (flate) compression and thus any + # program linked with the TIFF library needs a Jpeg and/or Z library. + # Some TIFF libraries have such library statically linked in, but others + # need it to be dynamically linked at program load time. + # Make this 'N' if youf TIFF library doesn't need such dynamic linking. + # As of 2005.01, the most usual build of the TIFF library appears to require + # both. + TIFFLIB_NEEDS_JPEG = Y + TIFFLIB_NEEDS_Z = Y + + # The JPEG library. See above. If you want to build the jpeg + # converters you must have the jpeg library already installed. + + # Tiff files can use JPEG compression, so the Tiff library can reference + # the JPEG library. If your Tiff library references a dynamic JPEG + # library, you must specify at least JPEGLIB here, or the Tiff + # converters will not build. Note that your Tiff library may have the + # JPEG stuff statically linked in, in which case you won't need + # JPEGLIB in order to build the Tiff converters. + + JPEGLIB = libjpeg.so + JPEGHDR_DIR = /usr/include + #JPEGLIB = libjpeg.so + #JPEGHDR_DIR = /usr/include/jpeg + # Netbsd: + #JPEGLIB = ${LOCALBASE}/lib/libjpeg.so + #JPEGHDR_DIR = ${LOCALBASE}/include + # OSF, Tru64: + #JPEGLIB = /usr/local1/DEC/libjpeg.so + #JPEGHDR_DIR = /usr/local1/DEC/include + # Typical: + #JPEGLIB = /usr/local/lib/libjpeg.so + #JPEGHDR_DIR = /usr/local/include + # Don't build JPEG stuff: + #JPEGLIB = NONE + + + # The PNG library. See above. If you want to build the PNG + # converters you must have the PNG library already installed. + + # The PNG library, by convention starting around April 2002, gets installed + # with names that include a version number, such as libpng10.a and header + # files in /usr/include/libpng10. + # option. + PNGLIB = libpng12.so + PNGHDR_DIR = /usr/include/libpng12 + PNGVER = + #PNGLIB = libpng$(PNGVER).so + #PNGHDR_DIR = /usr/include/libpng$(PNGVER) + # NetBSD: + #PNGLIB = $(LOCALBASE)/lib/libpng$(PNGVER).so + #PNGHDR_DIR = $(LOCALBASE)/include + # OSF/Tru64: + #PNGLIB = /usr/local1/DEC/lib/libpng$(PNGVER).so + #PNGHDR_DIR = /usr/local1/DEC/include + + # The zlib compression library. See above. You need it to build + # anything that needs the PNG library (see above). If you selected + # NONE for the PNG library, it doesn't matter what you specify here -- + # it won't get used. + + ZLIB = libz.so + ZHDR_DIR = /usr/include + #ZLIB = libz.so + + # The JBIG lossless image compression library (aka JBIG-KIT): + + JBIGLIB = $(BUILDDIR)/converter/other/jbig/libjbig.a + JBIGHDR_DIR = $(SRCDIR)/converter/other/jbig + + # The Jasper JPEG-2000 image compression library (aka JasPer): + JASPERLIB = $(INTERNAL_JASPERLIB) + JASPERHDR_DIR = $(INTERNAL_JASPERHDR_DIR) + + # And the Utah Raster Toolkit (aka URT aka RLE) library: + + URTLIB = $(BUILDDIR)/urt/librle.a + URTHDR_DIR = $(SRCDIR)/urt + + # The Linux SVGA library (Svgalib) is a facility for displaying graphics + # on the Linux console. It is required by Ppmsvgalib. + + LINUXSVGALIB = NONE + LINUXSVGAHDR_DIR = + + #LINUXSVGALIB_DIR = + #LINUXSVGAHDR_DIR = /usr/include/vgalib + + # If you don't want any network functions, set OMIT_NETWORK to "y". + # The only thing that requires network functions is the option in + # ppmtompeg to run it on multiple computers simultaneously. On some + # systems network functions don't work or we haven't figured out how to + # make them work, or they just aren't worth the effort. + OMIT_NETWORK = y + #DJGPP/Windows, Tru64: + # (there's some minor header problem that prevents network functions from + # building on Tru64 2000.10.06) + #OMIT_NETWORK = Y + + # These are -l options to link in the network libraries. Often, these are + # built into the standard C library, so this can be null. This is irrelevant + # if OMIT_NETWORK is "y". + + NETWORKLD = + # Solaris, SunOS: + #NETWORKLD = -lsocket -lnsl + # SCO: + #NETWORKLD = -lsocket, -lresolv + + VMS = + #VMS: + #VMS = yes + + # The following variables are used only by 'make install' (and the + # variants of it). Paths here don't, for example, get built into any + # programs. + + # This is where everything goes when you do 'make package', unless you + # override it by setting 'pkgdir' on the Make command line. + PKGDIR_DEFAULT = /tmp/netpbm + + # File permissions for installed files. + # Note that on some systems (e.g. Solaris), 'install' can't use the + # mnemonic permissions - you have to use octal. + + # binaries (pbmmake, etc) + INSTALL_PERM_BIN = 755 # u=rwx,go=rx + # shared libraries (libpbm.so, etc) + INSTALL_PERM_LIBD = 755 # u=rwx,go=rx + # static libraries (libpbm.a, etc) + INSTALL_PERM_LIBS = 644 # u=rw,go=r + # header files (pbm.h, etc) + INSTALL_PERM_HDR = 644 # u=rw,go=r + # man pages (pbmmake.1, etc) + INSTALL_PERM_MAN = 644 # u=rw,go=r + # data files (pnmtopalm color maps, etc) + INSTALL_PERM_DATA = 644 # u=rw,go=r + + # Specify the suffix that want the man pages to have. + + SUFFIXMANUALS1 = 1 + SUFFIXMANUALS3 = 3 + SUFFIXMANUALS5 = 5 + + #NETPBMLIBTYPE tells the kind of libraries that will get built to hold the + #Netpbm library functions. The value is used only in make file tests. + # "unixshared" means a unix-style shared library, typically named like + # libxyz.so.2.3 + #NETPBMLIBTYPE = unixshared + # "unixstatic" means a unix-style static library, (like libxyz.a) + NETPBMLIBTYPE = unixstatic + # "dll" means a Windows DLL shared library + #NETPBMLIBTYPE = dll + # "dylib" means a Darwin/Mac OS shared library + #NETPBMLIBTYPE = dylib + + #NETPBMLIBSUFFIX is the suffix used on whatever kind of library is + #selected above. All this is used for is to construct library names. + #The make files never examine the actual value. + NETPBMLIBSUFFIX = so + + # "a" is the suffix for unix-style static libraries. It is also + # traditionally used for shared libraries on AIX. The Visual Age C + # manual says sometimes .so works on AIX, and GNU software for AIX + # 5.1.0 does indeed use it. In our experiments, it works fine if you + # name the library file explicitly on the link, but isn't in the -l + # search order. If you name the library explicitly on the link, the + # library must live in exactly the same position at run time, so we + # can't use that. Therefore, you cannot build both static and shared + # libraries with AIX. You have to choose. + #NETPBMLIBSUFFIX = a + # For HP-UX shared libraries: + #NETPBMLIBSUFFIX = sl + # Darwin/Mac OS shared library: + #NETPBMLIBSUFFIX = dylib + # Windows shared library: + #NETPBMLIBSUFFIX = dll + + #STATICLIB_TOO is "y" to signify that you want a static library built + #and installed in addition to whatever library type you specified by + #NETPBMLIBTYPE. If NETPBMLIBTYPE specified a static library, + #STATICLIB_TOO simply has no effect. + STATICLIB_TOO = n + #STATICLIB_TOO = n + + #STATICLIBSUFFIX is the suffix that static libraries have. It's + #meaningless if you aren't building static libraries. + STATICLIBSUFFIX = a + + #SHLIBPREFIXLIST is a blank-delimited list of prefixes that a filename + #of a shared library may have on this system. Traditionally, it's + #just "lib", as in libc or libpbm. On Windows, though, varying + #prefixes are used when multiple alternative forms of a library are + #available. The first prefix in this list is what we use to name the + #Netpbm shared libraries. + # + # This variable controls how 'libopt' gets built. + # + SHLIBPREFIXLIST = lib + #Cygwin: + #SHLIBPREFIXLIST = cyg lib + + NETPBMSHLIBPREFIX = $(firstword $(SHLIBPREFIXLIST)) + + #DLLVER is used to version the DLLs built on cygwin or other + #windowsish platforms. We can't add this to LIBROOT, or we'd + #version the static libs (which is bad). We can't add this + #at the end of the name (like unix does with so numbers) because + #windows will only load dlls whose name ends in "dll". So, + #we have this variable, which becomes the end of the library "root" name + #for DLLs only. + # + # This variable controls how 'libopt' gets built. + # + DLLVER = + #Cygwin + #DLLVER = $(NETPBM_MAJOR_RELEASE) + + #NETPBM_DOCURL is the URL of the main documentation page for Netpbm. + #This is a directory which contains a file for each Netpbm program, + #library, and file type. E.g. The documentation for jpegtopnm might be in + #http://netpbm.sourceforge.net/doc/jpegtopnm.html . This value gets + #installed in the man pages (which say no more than to read the webpage) + #and in the Webman netpbm.url file. + NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/ + #For a system with no web access, but a local copy of the doc: + #NETPBM_DOCURL = file:/usr/doc/netpbm/